Honeywell C7061 F2001 Explosion-proof Flame Detector (NEW)

Honeywell C7061F2001 C7061 F2001 Explosion-proof Flame Detector

Oscillating shutter interrupts ultraviolet radiation reaching the UV sensor 12 times per minute to provide the UV sensor tube checking function. Amplifier circuitry components are checked from the microprocessor in the 7800 Series Control.
Detectors can be mounted horizontally, vertically, or at any other angle. The self-checking C7061 models require faceplate alignment and have integral locating reference points to assure proper shutter mechanism operation.
Ultraviolet radiation sensing tube and quartz viewing window are field replaceable.
Threaded conduit fitting and color-coded lead wires allow rapid electrical installation.
Models available using Molex Woodhead IR5006A20A120, (formerly Brad Harrison® 41310) connector.
Two flame detectors can be wired in parallel to reduce nuisance shutdowns in difficult flame sighting applications.
-40°F (-40°C) rated ultraviolet sensing tube.
Incorporates UV sensor tube checking feature; used with R7861 Dynamic Self-check Amplifiers.
Housing meets NEMA 4 enclosure standards (C7061A).
Protective heat block built into mounting flange.

Housing designed to be explosion-proof and Underwriters Laboratories Inc. listed for use in hazardous locations.
Classified for Class I, groups C and D; and Class II, groups E, F, and G.
Viewing window rated for 100psi (690 kPa)