Notifier LCD2-80 (NEW)
The LCD2-80 Notifier is a backlit LCD annunciator for the NOTIFIER fire alarm control panels, or network control annunciators that support the 80-character display format. LCD2-80s may be connected onto the four-wire EIA-485 terminal port. The LCD2-80 mimics the display of NFS2-640, NFS2-3030, NFS-320, NCA-2 and legacy panels that supported the LCD80/LCD-80TM. The NFS2-3030 and the NCA-2 also support LCD2-80s when set for LCD-80 supervision. Up to 32 LCD2- 80s can annunciate and provide remote reset, acknowledge, drill and silence of the control panel from remote locations.
LCD2-80 NOTIFIER Features:
- Display mimics panel or NCA:
– Event message.
– 20 characters for point label.
– 12 characters for extended label.
– Time, date and point address. - Control switches for System Acknowledge, Signal Silence Drill and System Reset.
- LEDS for general off-normal events with UL 864 9th EditionPanels. NOTE: The LEDs are only applicable when used with UL 864 Ninth Edition listed panels: NFS-320, NFS2-640,NFS2-3030, and NCA-2.
- ACS mode option for annunciation of user selected points. (VeriFire Tools 6.90 or higher required to program points.)
- Up to 6000 foot segments between units.
- Local piezo sounder with alarm/trouble resound.
- Displays device and zone custom alpha labels.
- LCD2-80 NOTIFIER mounts with any CHS-4 chassis slot.
- Slide-in label can be customized.
- Displays device type identifiers.
- Flush/surface/panel mount option.
- LCD2-80 displays time, date, and custom messages received from the compatible panel or network annunciator.
- LCD2-80 NOTIFIER is 8.25″ (20.96 cm) high, 4.375″ (11.11 cm) wide, and 1.75″ (4.45 cm) deep.
- Up to 32 LCD2-80s may be used on one EIA-485 circuit.
- Displays all analog, addressable points.
The LCD2-80 NOTIFIER mimics the display of NFS2-640, NFS2-3030,NFS-320, NCA-2 and legacy panels that supported the LCD80/LCD-80TM. The NFS2-3030 and the NCA-2 also support LCD2-80s when set for LCD-80 supervision. Up to 32 LCD2- 80s can annunciate and provide remote reset, acknowledge, drill and silence of the control panel from remote locations.