Cart 0
Notifier UDACT-2 (NEW)

Notifier UDACT-2 (NEW)

  • Save $150

UDACT-2 Notifier Universal Digital Alarm Communicator Transmitter-2.

The Universal Digital Alarm Communicator Transmitter UDACT-2 is designed for use on Notifier Fire Alarm Control Panels and on the NCA-2 Network Control Annunciator. When used in conjunction with the NCA-2 network control annunciator, the UDACT-2 can report the status of all control panels on NOTI•FIRE•NET™. The UDACT-2 transmits system status to UL listed Central Station Receivers via the public switched telephone network.

UDACT-2 NOTIFIER Features:

  • Programmable with VeriFire Tools version 6.60 or higher, allowing the UDACT-2 programming to be uploaded/downloaded and saved.
  • Maximum of 14 point trouble messages transmitted per hour.
  • Dual phone lines with line voltage detect.
  • Compact in size: 6.75″ x 4.25″ (17.145 x 10.795 cm).
  • USB port for upload/download programming.
  • Manual Test Report function.
  • Manual Transmission Clear function.
  • Mounts in a separate enclosure (ABS-8RB or UBS-1B/R).
  • UDACT-2 NOTIFIER Communicates vital system status including:
    – Independent zone fire alarm.
    – Independent zone non-fire alarm.
    – Independent zone trouble.
    – Independent zone supervisory.
    – AC (mains) Power Loss (programmable).
    – Low Battery and Earth Fault.
    – System Off-Normal.
    – 12 or 24-hour test signal.
    – Abnormal Test Signal per new UL requirements.
    – EIA-485 Communication Bus Failure.
  • Annunciation of UDACT-2 NOTIFIER Troubles including loss of phone lines, communication failure with either Central Station, total communications failure.
  • Individual LEDs for Power, EIA-485 Loss, Manual Test, Kissoff, Comm Fail, Primary Line Seize, Secondary Line Seize, and Modem Communications.
  • Open Collector relay driver for Total Communications Failure or UDACT-2 NOTIFIER trouble.
  • Real-time clock.
  • Extensive transient protection.
  • EIA-485 interface to host panel.