LenelS2 S2-ACM-MP Access Control Application Blade (NEW)
LenelS2 S2-ACM-MP: Access Control Application Blade with OSDP Support
The LenelS2 S2-ACM-MP Access Control Application Blade is a two-reader interface board with reader, input, and output points to support a wide range of devices. Of the four types of LenelS2 Application Blades, the Access Control Application Blade offers the largest variety of connections, and each blade supports up to two doors or other access points on a NetBox, NetBox Global, Network Node, or Network Node VRx.
Features and Benefits:
- Two Doors per Blade: Interfaces with OSDP (RS-485), Wiegand (Data0/Data1), and keypad technologies. Compatible devices include REX, DSM, door controllers, alarms, and card readers.
- Four Supervised Inputs: Quad state (open, short, normal, alarm) with 1K resistors, selectable per input as dual resistor, single series resistor, single parallel resistor, or unsupervised.
- Four Form-C Outputs: Dry SPDT contacts for locks or auxiliary devices, rated 30 VDC/AC, 2.5 A inductive or 5.0 A non-inductive.
- Plug and Play: Network Nodes automatically recognize and address blades without jumpers or switches. Up to seven Application Blades in any combination per Network Node.
- Reader Power Included: Power and communications are delivered over the ribbon cable bus, and the blade supplies 12 VDC at up to 250 mA per card reader.
Technical Specifications:
- Readers: 2, OSDP (RS-485) or Wiegand (Data0/Data1).
- Input Circuit: 2-pin supervised, dry contact only. Input cable twisted shielded 22 AWG (Belden 9462 or similar), maximum 2,000 ft (610 m).
- Power: Powered via ribbon cable connection from the Network Node blade.
- Dimensions: 7.5 x 4.0 x 0.83 in (191 x 102 x 21 mm), 6.77 oz (192 g).
- Environmental: Operating 32 to 95 F (0 to 35 C), storage -4 to 158 F (-20 to 70 C), 85% humidity non-condensing at 35 C.
- Certifications: UL, CE, RoHS. 2-year hardware warranty.
Applications and Versatility: The S2-ACM-MP handles door and access point control, alarm inputs, and auxiliary outputs on NetBox and Network Node systems, with OSDP secure reader connectivity for new installations and as a replacement for legacy S2-ACM blades.